The game of Cricket has been governed by The Rules of Cricket for over 250 years. These Rules of Cricket have been subject to additions and alterations recommended by the governing authorities of the time. Since its formation in 1787, the Marylebone Cricket Club (MCC) has been recognised as the sole authority for drawing up the Rules of Cricket and for all subsequent amendments.
Actually there are 41 rules in cricket. But i describe Rule no 1 and 2: 1. Number of playersA match is played between two sides, each of eleven players, one of whom shall be captain.By agreement a match may be played between sides of more or less than eleven players, but not more than eleven players may field at any time.2. Nomination of playersEach captain shall nominate his players in writing to one of the umpires before the toss. No player may be changed after the nomination without the consent of the opposing captain.3. CaptainIf at any time the captain is not available, a deputy shall act for him.(a) If a captain is not available during the period in which the toss is to take place, then the deputy must be responsible for the nomination of the players, if this has not already been done, and for the toss. See 2 above and Law 12.4 (The toss).(b) At any time after the toss, the deputy must be one of the nominated players.4. Responsibility of captainsThe captains are responsible at all times for ensuring that play is conducted within the spirit and traditions of the game as well as within the Laws.
Law 7 (The pitch)1. Area of pitchThe pitch is a rectangular area of the ground 22 yards/20.12m in length and 10ft/3.05m in width. It is bounded at either end by the bowling creases and on either side by imaginary lines, one each side of the imaginary line joining the centres of the two middle stumps, each parallel to it and 5ft/1.52m from it. See Laws 8.1 (Width and pitching) and 9.2 (The bowling crease).
2. Fitness of the pitch for playThe umpires shall be the final judges of the fitness of the pitch for play. See Laws 3.8 (Fitness of ground, weather and light) and 3.9 (Suspension of play for adverse conditions of ground, weather or light).
3. Selection and preparationBefore the match, the Ground Authority shall be responsible for the selection and preparation of the pitch. During the match, the umpires shall control its use and maintenance.
4. Changing the pitchThe pitch shall not be changed during the match unless the umpires decide that it is unreasonable or dangerous for play to continue on it and then only with the consent of both captains.
5. Non-turf pitchesIn the event of a non-turf pitch being used, the artificial surface shall conform to the following measurements:Length – a minimum of 58ft/17.68mWidth – a minimum of 6ft/1.83m
Sunday, August 26, 2007
Rules of Cricket
The game of Cricket has been governed by The Rules of Cricket for over 250 years. These Rules of Cricket have been subject to additions and alterations recommended by the governing authorities of the time. Since its formation in 1787, the Marylebone Cricket Club (MCC) has been recognised as the sole authority for drawing up the Rules of Cricket and for all subsequent amendments.
Actually there are 41 rules in cricket. But i describe Rule no 1 and 2: 1. Number of playersA match is played between two sides, each of eleven players, one of whom shall be captain.By agreement a match may be played between sides of more or less than eleven players, but not more than eleven players may field at any time.2. Nomination of playersEach captain shall nominate his players in writing to one of the umpires before the toss. No player may be changed after the nomination without the consent of the opposing captain.3. CaptainIf at any time the captain is not available, a deputy shall act for him.(a) If a captain is not available during the period in which the toss is to take place, then the deputy must be responsible for the nomination of the players, if this has not already been done, and for the toss. See 2 above and Law 12.4 (The toss).(b) At any time after the toss, the deputy must be one of the nominated players.4. Responsibility of captainsThe captains are responsible at all times for ensuring that play is conducted within the spirit and traditions of the game as well as within the Laws.
Law 7 (The pitch)1. Area of pitchThe pitch is a rectangular area of the ground 22 yards/20.12m in length and 10ft/3.05m in width. It is bounded at either end by the bowling creases and on either side by imaginary lines, one each side of the imaginary line joining the centres of the two middle stumps, each parallel to it and 5ft/1.52m from it. See Laws 8.1 (Width and pitching) and 9.2 (The bowling crease).
2. Fitness of the pitch for playThe umpires shall be the final judges of the fitness of the pitch for play. See Laws 3.8 (Fitness of ground, weather and light) and 3.9 (Suspension of play for adverse conditions of ground, weather or light).
3. Selection and preparationBefore the match, the Ground Authority shall be responsible for the selection and preparation of the pitch. During the match, the umpires shall control its use and maintenance.
4. Changing the pitchThe pitch shall not be changed during the match unless the umpires decide that it is unreasonable or dangerous for play to continue on it and then only with the consent of both captains.
5. Non-turf pitchesIn the event of a non-turf pitch being used, the artificial surface shall conform to the following measurements:Length – a minimum of 58ft/17.68mWidth – a minimum of 6ft/1.83m
Actually there are 41 rules in cricket. But i describe Rule no 1 and 2: 1. Number of playersA match is played between two sides, each of eleven players, one of whom shall be captain.By agreement a match may be played between sides of more or less than eleven players, but not more than eleven players may field at any time.2. Nomination of playersEach captain shall nominate his players in writing to one of the umpires before the toss. No player may be changed after the nomination without the consent of the opposing captain.3. CaptainIf at any time the captain is not available, a deputy shall act for him.(a) If a captain is not available during the period in which the toss is to take place, then the deputy must be responsible for the nomination of the players, if this has not already been done, and for the toss. See 2 above and Law 12.4 (The toss).(b) At any time after the toss, the deputy must be one of the nominated players.4. Responsibility of captainsThe captains are responsible at all times for ensuring that play is conducted within the spirit and traditions of the game as well as within the Laws.
Law 7 (The pitch)1. Area of pitchThe pitch is a rectangular area of the ground 22 yards/20.12m in length and 10ft/3.05m in width. It is bounded at either end by the bowling creases and on either side by imaginary lines, one each side of the imaginary line joining the centres of the two middle stumps, each parallel to it and 5ft/1.52m from it. See Laws 8.1 (Width and pitching) and 9.2 (The bowling crease).
2. Fitness of the pitch for playThe umpires shall be the final judges of the fitness of the pitch for play. See Laws 3.8 (Fitness of ground, weather and light) and 3.9 (Suspension of play for adverse conditions of ground, weather or light).
3. Selection and preparationBefore the match, the Ground Authority shall be responsible for the selection and preparation of the pitch. During the match, the umpires shall control its use and maintenance.
4. Changing the pitchThe pitch shall not be changed during the match unless the umpires decide that it is unreasonable or dangerous for play to continue on it and then only with the consent of both captains.
5. Non-turf pitchesIn the event of a non-turf pitch being used, the artificial surface shall conform to the following measurements:Length – a minimum of 58ft/17.68mWidth – a minimum of 6ft/1.83m
About Visual Basic
Learning the ins and outs of the Development Environment before you learn visual basic is somewhat like learning for a test you must know where all the functions belong and what their purpose is. First we will start with labelling the development environment.
Visual basic functions work similar to Microsoft word eg the Tool Bar and the tool box is similar to other products on the market which work off a single click then drag the width of the object required. The Tool Box contains the control you placed on the form window. All of the controls that appear on the Tool Box controls on the above picture never runs out of controls as soon as you place one on the form another awaits you on the Tool Box ready to be placed as needed.
1.The project explorer window
The Project explorer window gives you a tree-structured view of all the files inserted into the application. You can expand these and collapse branches of the views to get more or less detail (Project explorer). The project explorer window displays forms, modules or other separators which are supported by the visual basic like class'es and Advanced Modules. If you want to select a form on its own simply double click on the project explorer window for a more detailed look. And it will display it where the Default form is located.
The Default Layout
When we start Visual Basic, we are provided with a VB project.A VB project is a collection of the following modules and files.
The global module( that contains declaration and procedures)
The form module(that contains the graphic elements of the VB application along with the instruction )
The general module (that generally contains general-purpose instructions not pertaining to anything graphic on-screen)
The class module(that contains the defining characteristics of a class, including its properties and methods)
The resource files(that allows you to collect all of the texts and bitmaps for an application in one place)
Microsoft have included some freebies with visual basic to show its capabilities and functions. Dismantling or modifying these sample projects is a good way to understand what is happening at runtime. These files can be located at your default directory /SAMPLES/
To Open these projects choose 'Open Project' from the 'File' menu. Then Double click on the samples folder to open the directory then Double click on any project to load it.
Making your first *.exe!?
To make an excutable from a project choose 'MakeMake project.exe from the 'File' menu. Then click once on the Make project.exe choose a default location to store your executable, you can also change some advanced options by clicking on the Options.. tag before saving your exe
Visual basic functions work similar to Microsoft word eg the Tool Bar and the tool box is similar to other products on the market which work off a single click then drag the width of the object required. The Tool Box contains the control you placed on the form window. All of the controls that appear on the Tool Box controls on the above picture never runs out of controls as soon as you place one on the form another awaits you on the Tool Box ready to be placed as needed.
1.The project explorer window
The Project explorer window gives you a tree-structured view of all the files inserted into the application. You can expand these and collapse branches of the views to get more or less detail (Project explorer). The project explorer window displays forms, modules or other separators which are supported by the visual basic like class'es and Advanced Modules. If you want to select a form on its own simply double click on the project explorer window for a more detailed look. And it will display it where the Default form is located.
The Default Layout
When we start Visual Basic, we are provided with a VB project.A VB project is a collection of the following modules and files.
The global module( that contains declaration and procedures)
The form module(that contains the graphic elements of the VB application along with the instruction )
The general module (that generally contains general-purpose instructions not pertaining to anything graphic on-screen)
The class module(that contains the defining characteristics of a class, including its properties and methods)
The resource files(that allows you to collect all of the texts and bitmaps for an application in one place)
Microsoft have included some freebies with visual basic to show its capabilities and functions. Dismantling or modifying these sample projects is a good way to understand what is happening at runtime. These files can be located at your default directory /SAMPLES/
To Open these projects choose 'Open Project' from the 'File' menu. Then Double click on the samples folder to open the directory then Double click on any project to load it.
Making your first *.exe!?
To make an excutable from a project choose 'MakeMake project.exe from the 'File' menu. Then click once on the Make project.exe choose a default location to store your executable, you can also change some advanced options by clicking on the Options.. tag before saving your exe
Sunday, August 19, 2007
About My city Jamshedpur
About My city (Jamshedpur)
Jamshedpur is the founder of Tata Steel's . Previously it was called Sakchi, later on it was re-named in 1919 as to , is India's first planned industrial city. It is a model industry and environment, with acres of verdant parks and gardens dotting the city and providing. Tata Steel's commitment to cleaner and greener Jamshedpur. Tree plantation, an ongoing activity, found remarkable expression through the Green Millennium Countdown.
Jubilee Park
Jamshedpur's landscape is dotted with numerous well-planned and meticulously maintained recreational spots. The city boasts of 17 small and large parks. They provide much-needed relief from the pressures of everyday life. The lush green Jubilee Park, spread over 225 acres, adorned with flower beds, gardens and illuminated fountains was presented by the Steel Company to the citizens of Jamshedpur in its Golden Jubilee Year.
Tata Steel Zoological Park
Located only a few kilometers away from the Steel Plant is the Zoo which houses a variety of animals and birds. The Safari Park in the zoo enables visitors to take a drive through a wooded area where animals roam free and uncaged. A visit to the Nature Education Centre, a boat ride in the Jubilee Lake or a walk in the Nature Trail are unique outlets to relax. The co-existence of wild life in close proximity to the Steel Plant is evidence of the excellent balance of industry with nature.
Jubilee Amusement Park
The park has redefined entertainment in the Steel City. A special gift to the children of Jamshedpur, the amusement park provides entertainment that is available in far away metros only. The green hillocks and the waterbody provide a wonderful ambience for an outing where games like whirling in the wind, dashing cars, rolling till the moon, derby riding, caterpillar ride and a 75-meter slide can be enjoyed.
Keenan Stadium
This cricket stadium has been acknowledged by many visiting cricket teams as one of the finest in the country.
RD Tata Sports Complex
This magnificent complex has an international standard football ground and an eight-lane track.
XLRI
The prestigious Institute for Business Management and Labor Studies conducts two-year post-graduate courses in Business Management. It also has a three-year post-graduate Evening Programme in Business Management, tailor-made for professionals working in Jamshedpur.
Jamshedpur is the founder of Tata Steel's . Previously it was called Sakchi, later on it was re-named in 1919 as to , is India's first planned industrial city. It is a model industry and environment, with acres of verdant parks and gardens dotting the city and providing. Tata Steel's commitment to cleaner and greener Jamshedpur. Tree plantation, an ongoing activity, found remarkable expression through the Green Millennium Countdown.
Jubilee Park
Jamshedpur's landscape is dotted with numerous well-planned and meticulously maintained recreational spots. The city boasts of 17 small and large parks. They provide much-needed relief from the pressures of everyday life. The lush green Jubilee Park, spread over 225 acres, adorned with flower beds, gardens and illuminated fountains was presented by the Steel Company to the citizens of Jamshedpur in its Golden Jubilee Year.
Tata Steel Zoological Park
Located only a few kilometers away from the Steel Plant is the Zoo which houses a variety of animals and birds. The Safari Park in the zoo enables visitors to take a drive through a wooded area where animals roam free and uncaged. A visit to the Nature Education Centre, a boat ride in the Jubilee Lake or a walk in the Nature Trail are unique outlets to relax. The co-existence of wild life in close proximity to the Steel Plant is evidence of the excellent balance of industry with nature.
Jubilee Amusement Park
The park has redefined entertainment in the Steel City. A special gift to the children of Jamshedpur, the amusement park provides entertainment that is available in far away metros only. The green hillocks and the waterbody provide a wonderful ambience for an outing where games like whirling in the wind, dashing cars, rolling till the moon, derby riding, caterpillar ride and a 75-meter slide can be enjoyed.
Keenan Stadium
This cricket stadium has been acknowledged by many visiting cricket teams as one of the finest in the country.
RD Tata Sports Complex
This magnificent complex has an international standard football ground and an eight-lane track.
XLRI
The prestigious Institute for Business Management and Labor Studies conducts two-year post-graduate courses in Business Management. It also has a three-year post-graduate Evening Programme in Business Management, tailor-made for professionals working in Jamshedpur.
Saturday, August 18, 2007
My First day in CDAC Bangalore( formally NCST).
Before I write any think about CDAC, introduce myself. I'm came here from small city Jamshedpur or U can say STEEL City.
.I came to CDAC on 5th Aug 2007, But that is not Working day in CDAC so return back to hotel. The fist day we were introduced to the one of the best course possible in software technology, actually that is on my second day in Bangalore.
After the introduction session we want to canteen fro take a break. The lectures started on first day itself. This place has an excellent campus and infrastructure. Specially the 24X7 labs which will take away all the nights sleep. The environment here is such that you will never be able to feel that how much time has passed.We can really enjoy and learn in this environment.
The Excellent faculty is always present at your rescue. In past weeks we came to know about the pace of life and course. What content of course took weeks to be was completed in a one or more sessions. This is one course which surly requires a lot of determination.I have my interests in software and development field. This was the main reason of joining this institution.
I did my Bachelor of computer application as well as Bachelor of Arts . I have my core interests in open source development. I like playing Cricket and swimming but both of the game is not available in campus so i switch to volleyball, first few day no't like this game but now i feel this game is not so boring .
Bangalore is a nice city to learn and enjoying purpose. I visited several palaces like forum and Total mall, like this places because i never went at such places before.
Before I write any think about CDAC, introduce myself. I'm came here from small city Jamshedpur or U can say STEEL City.
.I came to CDAC on 5th Aug 2007, But that is not Working day in CDAC so return back to hotel. The fist day we were introduced to the one of the best course possible in software technology, actually that is on my second day in Bangalore.
After the introduction session we want to canteen fro take a break. The lectures started on first day itself. This place has an excellent campus and infrastructure. Specially the 24X7 labs which will take away all the nights sleep. The environment here is such that you will never be able to feel that how much time has passed.We can really enjoy and learn in this environment.
The Excellent faculty is always present at your rescue. In past weeks we came to know about the pace of life and course. What content of course took weeks to be was completed in a one or more sessions. This is one course which surly requires a lot of determination.I have my interests in software and development field. This was the main reason of joining this institution.
I did my Bachelor of computer application as well as Bachelor of Arts . I have my core interests in open source development. I like playing Cricket and swimming but both of the game is not available in campus so i switch to volleyball, first few day no't like this game but now i feel this game is not so boring .
Bangalore is a nice city to learn and enjoying purpose. I visited several palaces like forum and Total mall, like this places because i never went at such places before.
Subscribe to:
Posts (Atom)